Welcome to the Resale Wizard for used Steinberg software.
After a few clicks, you'll know what to consider when you are planning to sell or give away your Steinberg Software.
id="start"
Resale restrictions
Before you begin, please note the following resale restrictions:
Educational Licenses
Educational licenses are personal and must not be passed on or sold to any other third party or person.
Software/hardware bundle
So-called OEM software like Cubase AI, Cubase LE, WaveLab LE, Sequel LE must not be sold separately from the hardware they initially came bundled with. This also applies to included effect plug-ins, for example the Basic FX Suite collection.
eLicenser-based licenses after upgrade to
Steinberg Licensing-based license
eLicenser-based licenses that have been upgraded to a Steinberg Licensing license may not be sold separately from the corresponding Steinberg Licensing license.
In the eLicenser Control Center, such licenses are marked with this addition:
(Upgraded to [...] with Steinberg Licensing)
Example: After an update from Cubase 11 to Cubase 12, the eLicenser-based Cubase 11 license is inseparable from the Steinberg Licensing-based Cubase 12 license.
id="licensing-model"
Please select the licensing model of the Steinberg software you are planning to sell.
Steinberg Licensing has been introduced in January 2022 and several products like Cubase 12, Nuendo 12, Dorico 4 and WaveLab 11.1 rely on this licensing system already. Read more...
The license of the software you want to sell is stored on a USB-eLicenser, a dongle (key) that needs to be connected to a USB port while using the software. Read more...
The license of the software you wish to sell is stored in the so-called Soft-eLicenser, a virtual license container on the hard disk. Read more...
Before eLicenser technology has been introduced in 2002, Steinberg used various software licensing schemes: Parallel port resp. line printer dongles (Cubase VST, Nuendo 1 PC), iLok dongles (Nuendo 1 Mac), copy protected CD-R, serial numbers and installation codes.
id="license-steinberg-licensing"
Start ▸ Licensing model ▸ Steinberg Licensing
Reselling software relying on Steinberg Licensing
You are planning to sell Steinberg software with a Steinberg Licensing-based license. This means it is neither stored in a Soft-eLicenser nor on a USB-eLicenser.
If you want to correct your information, please go back one step.
Required steps before selling
Steinberg Licensing-based licenses can be used on up to three computers. Before requesting for change of ownership, please deactivate all active licenses via Steinberg Activation Manager.
⚠️ A license transfer is not possible as long as a license is still in use.
Request for change of ownership
First, please make sure the license you want to sell or pass on is not active on any computer. Use the Steinberg Activation Manager to deactivate licenses still in use.
If the license is not active on any computer, please send us the request for change of ownership via email by clicking the button below.
Please include the following details:
- Email address associated with your MySteinberg account
- Full name as stated in your MySteinberg account
- Name of registered license as shown in your MySteinberg account
- If possible, please attach a screenshot showing the license in your MySteinberg account
Kindly note that we can only process your request, if the details you provide are complete and match the information registered with your MySteinberg account.
Instead of clicking on the button, you can also send an email to: licensetransfer@steinberg.de
Once your application has been processed and successfully verified, you will receive a new Download Access Code via email. This may take several business days.
Recommended scope of supply
- License
- The new owner needs an unused Download Access Code to download the license of the program via the Steinberg Download Assistant.
- Installation media
- The new owner will, of course, need to install the software. For all software products using Steinberg Licensing, installers are available in the Steinberg Download Assistant, and, in most cases, also in the download section of our website.
- Decide for yourself whether the availability in the Steinberg Download Assistant or a link to the download page is sufficient. Alternatively, you can include a copy of the installation files on a suitable storage medium.
id="license-usb-elicenser"
Start ▸ Licensing model ▸ USB-eLicenser
Reselling software with a license stored on USB-eLicenser
You are planning to sell Steinberg software with a license stored on a USB-eLicenser (dongle, key).
If you want to correct your information, please go back one step.
Required steps before selling
Selling software with a license stored on a USB-eLicenser is straight-forward and does not require contacting support. You can do this completely on your own. Just make sure, the USB-eLicenser is not registered with a MySteinberg account.
Unregistered USB-eLicenser
If the USB-eLicenser holding the license of the software you intend to sell is not registered, you can pass it on without further ado. The new owner will be able to register the USB-eLicenser with his/her own account.
Registered USB-eLicenser
If you have already registered your USB-eLicenser with your MySteinberg account, simply remove the registration by following these steps:
- Please log in to your MySteinberg account.
- In the menu on the left, click on "Show eLicenser-based products".
- You'll be directed to the "My Products" page.
- Select the "eLicenser" tab beneath the big red buttons.
- In the list of registered USB-eLicensers, select the USB-eLicenser you want to unregister.
- The entry will be extended to show a list of stored licenses.
- Click on "x Delete registration" at the bottom of the list.
- Click on "Continue" to confirm the deletion.
- Now you can sell the software and pass on the USB-eLicenser
Multiple licenses on the USB-eLicenser
If you have more than one license stored on your USB-eLicenser, and you don't want to sell all licenses together, simply transfer the license you wish to sell to a second USB-eLicenser, following the instructions here: Transferring eLicenser-based licenses
Recommended scope of supply
- License
- The new owner needs the unregistered USB-eLicenser holding the license of the software.
- Installation media
- The new owner will, of course, need to install the software. For most products, installers are available in the Steinberg Download Assistant or in the download section of our website.
- Decide for yourself whether the availability in the Steinberg Download Assistant or a link to the download page is sufficient. Alternatively, you can include a copy of the installation files on a suitable storage medium.
- For older software, the original storage medium resp. mediums (CD-R, DVD) might be required.
id="license-soft-elicenser"
Reselling software with a license stored in a Soft-eLicenser
You are planning to sell Steinberg software that stores its license in a Soft-eLicenser on the hard disk.
If you want to correct your information, please go back one step.
Required steps before selling
We can only assist you with selling your Soft-eLicenser-based software license, if it is registered with a MySteinberg account. If you have a license activated in a Soft-eLicenser that has not been registered yet, please register it.
Request for change of ownership
To request for change of ownership, please email us by clicking the button below.
Alternatively, you can transfer the license from the Soft-eLicenser to a USB-eLicenser.
If you choose this way, you don't need to contact the support.
Please include the following details:
- Email address associated with your MySteinberg account
- Full name as stated in your MySteinberg account
- Name of registered license as shown by the eLicenser Control Center
- Registered Soft-eLicenser number as shown by the eLicenser Control Center
- If possible, please attach a screenshot showing your license in the opened eLicenser Control Center.
Kindly note that we can only process your request, if the details you provide are complete and match the information registered with your MySteinberg account.
Instead of clicking on the button, you can also send an email to: licensetransfer@steinberg.de
Once your application has been processed and successfully verified, you will receive a new activation code via email. This may take several business days.
Recommended scope of supply
- License
- The new owner needs the unused activation code to download the license of the program.
- Alternatively, you can transfer the license from the Soft-eLicenser to a USB-eLicenser, which you can pass on to the new owner.
- Installation media
- The new owner will, of course, need to install the software. For most products, installers are available in the Steinberg Download Assistant or in the download section of our website.
- Decide for yourself whether the availability in the Steinberg Download Assistant or a link to the download page is sufficient. Alternatively, you can include a copy of the installation files on a suitable storage medium.
- For older software, the original storage medium resp. mediums (CD-R, DVD) might be required.
id="license-pre-elicenser"
Reselling software with a legacy licensing model
You've stated that you are planning to sell Steinberg software that is relying on an older licensing model, for example a serial number, a line printer dongle, an iLok dongle or a copy-protected CD-R. This means the software is about more than two decades old.
If you want to correct your information, please go back one step.
License and registration
Software of this age cannot be updated or upgraded to a current program version. It also cannot be registered, and registrations that might have been made previously are no longer existent.
This makes selling the software straightforward. Just make sure the new owner gets everything needed for the installation and the license.
Updates might be available under "Unsupported Products" or in the "FTP Download Archive" on our download page.
Please understand that we cannot provide any more detailed information on reselling legacy software.