The following troubleshooting tips and instructions apply to all current versions of Cubase and Nuendo for Windows - with minor changes or limitations also to earlier versions.
- Updating the eLicenser Control Center
- Initializing preferences
- Updating the software
- Reinstalling the software
- Updating device drivers
- Verifying memory usage
- Solving plug-in trouble
- Solving MIDI timing trouble
- Further articles
Updating the eLicenser Control Center
The most common reason for USB-eLicenser (dongle, formerly named Steinberg Key), Soft-eLicenser, and/or license-related problems is an outdated or corrupted eLicenser Control Center installation.
So if a USB-eLicenser or a specific license on it is not recognized, or you get any license-related error messages when starting your Steinberg software, you should download and install the latest eLicenser Control Center at first. In case the installation fails, try to install again after you've unplugged the USB-eLicenser.
This article provides further and more detailed assistance in solving dongle- and license-related issues:
USB-eLicenser - Details, tips and troubleshooting
Initializing preferences
Corrupted program preference files can bring your Steinberg program into all kinds of trouble, particularly after installing an update.
Fortunately, refreshing the preferences is straightforward:
- Close all programs.
- Open the 'Run' command prompt by pressing the Windows logo key and R on the keyboard simultaneously. The Windows key is located between the keys Ctrl and alt.
- In the command line of the 'Run' window, enter this path: %appdata%/Steinberg
- Locate the folder that is named the same as your Steinberg program, for example, 'Cubase 11'.
- Rename it (for example, from 'Cubase 11' to 'xCubase 11') to hide it from your Steinberg software. The folder will only be hidden safely if the change is done before the original folder name.
- If you find folders of previous versions of your program, make sure to hide or remove them, too.
Next time you start your Steinberg program, it will create a new folder with fresh preferences and default settings, which hopefully resolves the problem you've experienced.
Please note: Make sure to hide or remove preferences folders of all installations of your Steinberg program. Otherwise the program would try to comply with them when creating fresh preferences. And exactly this could be the source of errors.
Initialising the program's preferences does not necessarily mean that you lose all settings. For example, if you have defined your own set of key commands that you want to keep, you can replace the corresponding file (Key Commands.xml) in the freshly created folder with a copy of the same file taken from the folder you've disabled by renaming.
Alternative ways: Instead of renaming it, you also can move the preferences folder of your program from Steinberg's application data folder to another place, for example the desktop. You can even simply trash it if you are sure that your user settings are not that difficult to rebuild. Another approach: Since often the file 'Defaults.xml' will be the troublemaker, you also could try if renaming or deleting only this particular file already solves the problem.
This Help Center article provides further information on Cubase's preferences and their location: Preferences of Cubase and Nuendo
Making a backup of the preferences obviously is a good idea, especially when you customize a lot. And it's easy: simply keep a copy of the preferences folder that you can fall back on whenever you need to reset the preferences to your preferred settings.
Updating the software
Check if your Steinberg software is up-to-date. A current version might include a solution for the problem you are experiencing. Updates are available via the Steinberg Download Assistant (recommended) and, alternatively, on dedicated download pages.
Look out for "Release Notes" and "Version History" documents to learn about issues that have been addressed.
Reinstalling the software
Reinstalling the complete program is only necessary on rare occasions. In general these steps will suffice:
- Close all programs.
- In Windows, go to Control Panel > Programs and Features.
- In the list of installed programs, select the Steinberg software you want to reinstall and click on 'Uninstall'.
- Follow the instructions of the uninstaller.
- Optional: Of course, the uninstaller only deletes files it previously installed. If you find a remaining program folder under 'C:\Program Files\Steinberg' take a look inside and check if it contains files that you want to keep. If not, delete the folder.
- Optional: Remove (or hide) the preferences folder (see information on 'Initialising preferences' above).
- Install the software using the original installer you've received on CD/DVD or as a download. In case a newer complete installer is available on the download page, it should be preferred.
- Install the latest update available on the download page.
Updating device drivers
Your Steinberg software is dependent on flawlessly working audio and MIDI interfaces. Many problems are caused by bad device drivers. Check the homepage of your gear's manufacturer for updates. If you have installed drivers from a CD-R that came with an interface you can almost be sure that they are fatally outdated.
Verifying memory usage
These symptoms may point to insufficient memory (RAM):
- sluggish, unresponsive user interface
- seemingly random crashes
- white program or plug-in windows
Use Windows Task Manager to get an overview of the memory usage. In case less than 500 MB free memory are available, the overall performance of the system as well as the stability of single programs might be reduced severely.
On a 64-bit system, you should make sure to run the 64-bit version of your Steinberg program and additionally installed plug-ins. Otherwise, maximally 4 GB of the installed memory can be used and memory issues might occur, even though the system memory ressources don't seem to be exhausted. Read more...
Apart from the size of the installed memory modules, the amount of free memory depends on the individual way of working and the loaded project. In case your system is short of memory, you have the following options:
- Quit all redundant programs. For example, an internet browser running in background with some opened tabs can easily consume 1 GB RAM or more. In case of doubt, use Task Manager to get an overview of the memory allocation.
- Sample-based VST Instruments are the biggest memory consumers within a project. Therefore, you should only use as many VST Instruments as necessary. If possible, do not use multiple instances of the same VST Instrument. Instead, use several MIDI tracks to address a single instance of the same instrument.
- If you do not want to confine yourself to a memory-saving way of working, you will need to expand the installed memory, which might require a switch from 32-bit to 64-bit.
Solving VST Plug-in Trouble
If Cubase/Nuendo hangs or quits during the start-up or while loading a specific project file, it is likely that an installed VST plug-in is causing trouble.
Temporarily hiding installed VST plug-ins from Cubase/Nuendo is an easy and effective way to verify if a specific plug-in is indeed sabotaging your Steinberg software.
Of course, for this operation you need to know all VST plug-ins folders Cubase/Nuendo knows...
Locating VST plug-in folders
- In Cubase/Nuendo, select 'Plug-in Manager' from the 'Devices' menu.
At the bottom left, click on the gear symbol to open the 'Plug-in Manager Settings'
Older Cubase/Nuendo versions:
Select 'Plug-in Information' from the 'Devices' menu.
Make sure the 'VST PlugIns' tab is selected and click on 'VST 2.x Paths'.
- The VST 2 paths known to Cubase/Nuendo will be listed. Write them down, make a screenshot or simply memorize them.
- Additionally, consider the VST 3 plug-ins folder: C:\Program Files\Common Files\VST3
Hiding VST plug-ins
The following steps describe only one possible application of the 'hiding strategy'. Of course, you can have your own approach if you've understood the basic idea.
- Quit Cubase/Nuendo.
- Navigate to the first VST plug-in folder (refer to the note or screenshot you've made before, or your memory).
- Assuming the folder is named 'VSTPlugins', rename it to 'VSTPlugins_hidden'. This will hide it from Cubase/Nuendo.
- Restart Cubase/Nuendo.
- If necessary, load the problematic project. In this case, Cubase/Nuendo will complain about missing plug-ins. Simply ignore corresponding error messages.
If the problem persists, it obviously is not related to a VST plug-in inside this hidden folder. In this case, rename the folder to its original name and repeat the procedure with the next VST plug-ins folder on your list.
If hiding one of the folders actually resolved the problem, you still don't know the bad guy, but, after all, you know where he is living... To identify the problematic plug-in, create a new folder next to the hidden one and give it the original name, in this example 'VSTPlugins'. Now you can move the most suspicious plug-in from the renamed folder (e.g. 'VSTPlugins_hidden') to the new one (e.g. 'VSTPlugins'). Restart Cubase/Nuendo and see if it still runs correctly. Repeat moving plug-ins and restarting Cubase/Nuendo until you've finally isolated the troublemaker. In case you have many plug-ins installed, moving half of them at a time might speed up the search.
Solving MIDI timing trouble
Don't despair if incoming MIDI data will not be recorded correctly, for example with a constant offset, although you have already updated the MIDI driver. The following instructions will probably address the problem:
Cubase SE/SL/SX 3.1 and Nuendo 3.1 or later
- In Cubase/Nuendo, select 'Devices Setup...' from the 'Devices' menu.
- In the 'Device Setup' window click on MIDI > MIDI Port Setup.
- Installed MIDI ports should now be listed in the right part of the window.
- Enable the option 'Use System Timestamp for 'Windows MIDI'' which you find beneath the listed ports. Depending on the installed MIDI driver 'Use System Timestamp for 'Windows DirectMusic'' might also be available. Enable it, too. (If system timestamp already has been used un-check the option. In other words: Change the status of the 'Use System Timestamp...' option.)
- Click on OK in order to close the Device Setup window and enjoy accurate MIDI data recording.
Older Cubase and Nuendo Versions
- Please refer to this help center article.
Further articles
In these articles you'll find further solutions for problems on your computer:
Windows: How to set up and optimize a Digital Audio Workstation
USB-eLicenser - Details, tips and troubleshooting